- What We Protect
- Who We Protect
- How We Protect
Simply click on the + on the image below to find out more about the system & components fitted to this CNC Machine. Our systems use clean extinguishing agents to suppress the fire with no damage, no mess and complete total flood protection.
Manufactured by 3M™
3M™ Novec™ 1230 or FK-5-1-12 is a fluorinated ketone that is stored as a liquid and discharged as a gas. It is electrically non-conductive and leaves no residue after discharge. It distributes uniformly throughout the hazard zone and suppresses fire primarily by heat absorption from the flame.
Manufactured by Chemours™
FM-200™ sometimes referred to as HFC-227ea is the most tested liquefiable clean agent of all time. It is an electrically non-conductive odourless and colourless gas. FM-200™ offers minimal downtime due to no clean-up, post discharge. It is stored as a liquid and introduced into the protected hazard as a clear colourless vapor. FM-200™ leaves no residue and is suitable for occupied spaces. FM-200™ has zero Ozone Depletion Potential.
Reacton’s Clean Agent range consists of 3M™ Novec™ 1230 Fire Protection Fluid and FM-200™ waterless fire suppressant from Chemours™. These Clean Agents are the most trusted and tested liquefiable gases on the market with all supply being solely through the biggest names in the industry when it comes to Clean Agents.
Reacton Clean Agent extinguishing mediums all have the following approvals:
Reacton uses a patented ultra high flow fire suppression valve. The valve, made from 303 stainless steel alloy, ensures that all extinguishing agents are discharged as designed.
Our systems feature:
Increasing amounts of CNC Machine shops are looking at alternatives for coolant such as oil based coolants to achieve greater precision and tool life in applications such as medical, aerospace, marine and automotive applications. However with this chance comes an increased risk of fire in CNC Machines. To mitigate the risk Reacton has successful installed and suppressed fires in CNC machines for over 25 years, saving machine shops and CNC operators from the effects of fires.
Our systems are recognised by major insurance underwriters and supported by a comprehensive fire risk assessment before installation. Our CNC fire protection system is suitable to be fitted to all CNC machines including high precision machines and swiss type lathes.
The Reacton CNC fire suppression system uses our proprietary detection tubing, which once installed in the protected area will detect a fire inside the CNC Machine. Once the fire is detected, our patented automatic pneumatic value operates, causing the extinguishing agent to be released into the CNC Machine.
Additional options such as pressure switches and indication panels alert the CNC operator to the fire. These are often connected to central building alarm panels and other communication platforms.
Reacton systems are designed to meet the most robust and demanding certification standards around the world. Our automatic fire suppression systems are independent of a power source which ensures detection and suppression in any condition. Our systems are all manufactured and designed under our BSI ISO9001:2015 quality policy and are CE & DOT Compliant. Our components undergo vigorous testing such as ISO 16750-3:2007, ISO 21207, IEC 60529:1989.
Keep up-to date with our CNC machine fire protection as well as Clean Agent Blogs, News and upcoming trade shows.